ST330 VDSL2 Tester

Advanced VDSL2 Tester with Windows OS, touching screen

Brief Introduction

ST330 is designed for present all kinds of xDSL line including ADSL, ADSL2, ADSL2+, READSL, VDSL2. It not only can test xDSL physical layer parameter, but also can help you to confirm whether your line is proper to provide xDSL service. It also can evaluate your line quality. It also can have PPPoE dial, do IE network page browsing, and emulate user’s PC+ Modem by inside Modem of ST330 to test the connection between user and ISP provider. You can have all kinds of test such as Ping, Ipconfig, Rouge, Tracert after successful dial. ST330 also can emulate the user’s PC to test broadband IP line or have PPPoE dial by user's Modem to test the connection of IP network and Modem problem or to remove the problem arisen by computer.

Key Features

CE approval

Modular platform design

To identify and adapt the DSL line connect mode automatically

WINCE display and touching operation for user’s easy operation

Remote software upgrade

Link to USB equipment, keyboard, mouse and memory key by USB port

Main Functions

1. xDSL Test Physical layer test PPPoE dial and PPPoE dial properties change Network layer test (Ping, Ipconfig, Tracert and Route) IE Webpage browsing test function

2. LAN Test LAN port PPPoE Dial and properties change function. Network layer test (Ping, Ipconfig, Tracert and Route). Fixative IP scanning function. Webpage browsing function.

3. DMM Test AC/DC voltage Loop resistance Capacitance Insulation

4. MODEM Emulation Perform MODEM Emulation function to dial and log on internet to check faults.

5. File Management Record browsing File transfer among the tester, memory key and PC

6. Help System Software Upgrade Function Set Screen Recalibration

Technical Specifications

Chip Set: Globespanvirata

Relevant Standards: ANSI T1.413 issue #2 ITU-T G.992.1 (G.DMT) ITU-T G.992.2 (G.Lite) ITU-T G.992.5 ITU-T G.992.5 Annex L ITU-T G.994.1 (G.hs) ITU G.993.2 (VDSL2)

Physical Layer Test

ADSL2+ Module:

Attenuation (dB): 0~63.5

Noise margin (dB): 0~32

Up channel speed (Mbps): 0~1.2

Down channel speed (Mbps): 0~24

The max test distance: 6.5 km DMT sub channel bit number 0~15 State display Signal loss, connection close.

DSL line up/down maximum rate and capacity ratio DSL line local output power

DSL line error number (CRC,HEC, FEC,NCD,OCD)

ADSL2 Module:

Attenuation (dB): 0~63.5

Noise margin (dB): 0~32

Up channel speed (Mbps): 0~1

Down channel speed (Mbps): 0~8

DSL line error number (CRC,HEC,FEC,NCD,OCD) DSL line local output power DSL line connection mode

VDSL2 Module:

Be compatible with ADSL2+, ADSL standard.

DSL line attenuation DSL line noise margin DSL line up/down channel speed (Inter/Fast mode)

DSL line up/down maximum rate and capacity ratio DMT sub channel bit number:0~15, and each sub channel frequency points

DSL line error number (CRC, HEC, FEC, LCD, OCD) DSL line local output power State display: signal loss, connection close DSLAM information Error Code Second Impulse Noise Protection (INP)

Support the first 7 profiles in total 8 VDSL2 profiles: profile 8a, 8b, 8c, 8d, 12a, 12b, 17a, 30a

DMM Test DC voltage (V): 0~400 AC voltage (V): 0~400 Loop resistance(Ω): 0~20000 Capacitance (nF): 0~1000 Insulation resistance (MΩ): 0~50

Other Specifications

Memory capacity: 20 M Display: 240×320 LCD, touch screen, Embedded OS, windows interface Power Supply System highest power: 7.1W Internal: Rechargeable 7.4 V 2700mAH Li-ion battery Battery Duration: 8hs (except Modem status)

Dimensions/Weight: 176mm×130mm×60mm/0.7kg(With battery)

ST330 VDSL2 Tester